The YakAttack MightyMount Switch™ is a versatile mounting solution designed to bring modern track accessory compatibility to kayaks without the need for additional drilling. This innovative mount features a universal hole pattern that aligns with traditional deck mounts, allowing for a seamless transition to the latest in kayak accessory technology. Compatible with the YakAttack LockNLoad™ mounting system and other MightyBolt accessories, it offers unparalleled flexibility for your kayak setup.

Crafted with care in the USA and backed by YakAttack's Built for Life Guarantee, the MightyMount Switch ensures durability and reliability on the water. Whether you're outfitting a rotomolded, ABS, or even an inflatable kayak, this mount is designed for easy installation. For inflatables, it pairs effortlessly with the YakAttack SwitchPad or similar mounts using provided hardware, ensuring a secure fit without the need for long screws. For hardshell kayaks, the mount's straightforward installation process involves minimal drilling and offers the option to apply marine sealant for extra durability.

Instructions for Inflatable Kayaks: **Please do not use Loctite or a threadlocker that reacts with plastics**

1. Locate the red bag of hardware containing nuts, washers, and LONG screws and discard them. They will not be used for inflatable kayak installs.
2. Position the MightyMount Switch on your YakAttack SwitchPad or other inflatable mounts.
2. Locate the SHORT 1/4-20 x 5/8" long stainless screws in the bag labeled, “Hardware for Inflatable Installs.”
3. Insert a SHORT screw into each hole of the MightyMount Switch.
4. Hand tighten with a Phillips Screwdriver until snug. Repeat steps 3 and 4 for the rest of the hardware.
5. After all screws are installed, fully tighten, being careful not to over tighten.

Instructions for Rotomolded and ABS Kayaks: **Please do not use Loctite or a threadlocker that reacts with plastics**

1. Locate the Hardware for Deck Mount Installs
2. Position the MightyMount Switch on the surface where you want to install it.
3. Using a hole in the MightyMount Switch as a guide, drill the first hole using a 17/64” drill bit.
4. Drop a LONG 1/4‐20 screw through the MightyMount Switch and into the drilled hole. This will prevent the MightyMount Switch from sliding around as other holes are drilled.
5. Repeat steps 2 and 3 for the rest of the holes.
6. Once all holes are drilled, remove all screws.
7. Apply marine sealant as desired into hole and/or on screw threads.
8. Install first screw with washer and nut on inside of hull, but do not fully tighten.
9. Repeat steps 6 and 7 for remainder of screws.
10. After all screws are installed, fully tighten, being careful not to over tighten.